Flex-Shaft Tools

Foredom^®

If you're going to buy a flex-shaft tool, buy the best - Foredom. As a Foredom dealer and service depot, we can meet all of your power carving needs. We service what we sell. We also stock bearings and lots of other repair parts.

Foredom 5400

The Foredom 5240 woodcarving kit for the carver who needs lots of power at various speed ranges. The 1/3HP TX motor is a powerful DC motor that provides smooth acceleration at speeds up to 15,000RPM, with high torque at all speeds (please note that TX motors do not have reverse). Supplied with a 1/3HP TX motor, standard shaft & sheath, SXR foot control, #44 Handpiece with 3 collets (1/4",1/8", 3/32"), 12 piece accessory kit, brushes, wrench & shaft grease. Accepts all standard Foredom handpieces. CSA approved.

Foredom 5240

The Foredom 5240 woodcarving kit - Re-designed 1/6HP Foredom SR Motor gives 30 percent more power than the original SR motor. This all-new kit includes a 1/6HP SR reversible motor, #44T handpiece, 3 collets, FCT foot control, and the new 47-piece woodcarvers pro accessory kit complete with two bur holders. Also includes a 2-year warranty. CSA approved.

Foredom 5200

The Foredom 5200 deluxe woodcarving kit is the deluxe version of the 5240 kit (above). Includes everything in the 5240 kit, plus a #28 handpiece with two collets; safety glasses, and an upgraded SCT heavy-duty metal foot control. 2-year warranty. CSA approved.

Foredom THX440

The Foredom TXH440 industrial kit is more powerful than any other flex shaft tool. Supplied with special handpiece #44HT, Heavy-duty shaft and sheath, 2 collets (1/4", 1/8"), SXR Foot control, and HK25 10-piece accessory kit. 15,000RPM.

PLEASE NOTE: TX motors do not have reverse. The TXH440 uses special heavy handpieces, shafts, and sheaths. They are not interchangeable with regular Foredom accessories. This is a great tool for stone and antler carvers; we recommend the other Foredom machines for most general applications. Please call if you’re not sure. CSA approved.

Foredom Power Chisel Carver

The Fordom power chisel carver H50 carves wood like a hot knife through butter! Uses Foredom Stainless steel cutters or flexcut cutters. Foredom cutters can also be used in other power carvers like Proxxon, etc. Fits on all standard Foredom shafts. Use only in "forward" motor direction. Max speed 18,000RPM, Optimum speed 3,000-10,000RPM. This is a very comfortable and useful tool! The kit #FORH50C includes a wrench and 6 pre-sharpend steel chisels (#FORAKHK550). 22 individual chisels and 5 sets available.

Foredom Belt Sander Kit

The Foredom Belt Sander Attachment Kit uses 9/32" x 10-1/8" belts. supplied with #30 handpiece, chuck key, hex key, 180 grit belt installed and 3 each of 100, 180, 240 grit replacement belts. Fits all standard Foredom flex-shaft machines.

You will wonder how you ever did without these handy sanding cones. They are quick, convenient, and economical. Best of all, they do an incredible job of fine sanding and blending in those hard-to reach areas that all wildlife carvers encounter all the time.

Razertip Catalogue

Download the lastest Razertip Pyrographic Tools Catalogue.