- Home :
- Catalogue :
- Shop Online :
- Your Privacy :
- Warranty :
- Contact
Razertip Pyrography Tips - page 2
Available Tip Shapes:
T=Standard tip only TH=Heavy-duty Tip only
F=Fixed-tip Standard Pen HD=Fixed-tip Heavy-duty Pen.
F=Fixed-tip Standard Pen HD=Fixed-tip Heavy-duty Pen.
# 6LW Large Wide Chisel
General pyrography, long, straight lines and some shading. Can be bent (curved) for some "stamping" effects.
# 6L Large Chisel
General pyrography, long, straight lines and some shading. Can be bent (curved) for some "stamping" effects.
# 6M Medium Chisel
General pyrography. Useful for detailing and shading. Sometimes used for "calligraphy" effect.
# 6S Large Round
Useful for detailing where lines must be terminated at both ends. Also small shading, calligraphy, and general pyrography work.
# 6SB Small Calligraphy Chisel
Designed primarily for calligraphy, the 6SB's sharp edge is more bullet-nosed than knife-sharp so it's less likely to dig into the wood.
# 6XS Extra Small Chisel
World's smallest chisel tip (approx. 1/16" wide). Ideal for super-miniatures as well as extremely fine detail. Unique to Razertip. Best used at lower heat settings ("7" or under).
# 6MC Medium Chisel Shader
Medium chisel-shaped shader for general purpose shading. Not sharp.
# 7L Large Round Skew
General detail work. Great for fine detail on feathers, hair, or sculpted surfaces. Popular with more advanced bird and animal carvers.
# 7M Medium Round Skew
Used in the same way as the 7L, but for work on somewhat smaller areas.
# 7S Small Round Skew
Used much like the 7L and 7M. Great for extreme fine detail in confined areas or on very small pieces.
# 7XS Extra Small Round Skew
World's smallest round skew tip (approx. 1/16" wide). Ideal for super-miniatures as well as extremely fine detail in pyrography. Unique to Razertip. Best used at lower heat settings ("7" or under).
# 8 Burnisher
For burnishing. Also for fine, wrinkle-like details on wood, paper, etc. Useful for wrinkles on duck bills.
# 9 Writing Tip
Standard writing pen, used like a pen for writing, signing. Yields line approx. 1/32"-1/16" wide.
# 9G.17 Guord Cutter
Tempered tip is great for piercing/cutting gourds. Use at fairly high heat with a "sawing" action. Very popular with gourd artists.
# 9S Small Writing Tip
Small (fine) writing pen, used much like a ball-point pen for writing, signing. Yields line approx. 1/32" wide, depending on heat setting and material being burned.
# 9P Small Writing Tip
Similar to the #9S but with a more slender shoulder. Slightly more delicate than the #9S. Line width approx. 1/32".
# 9XS Extra Small Writing Tip
Our smallest, finest writing tip. Ideal for very fine writing and super-miniatures as well as extremely fine detail (dots) in pyrography.
# 10L Large General Pyrography
Very versatile general pyrography pen. Uses include writing, shading, small scale marks, burnishing. Will burn 2 parallel lines approx. 1/16" apart.
# 10R Regular General Pyrography
Used in the same way as the 10L. Shorter tip length makes the 10R a bit stronger to withstand more pressure when burning.
# 11-2L Dual Line
Large round dualline tip. Burns 2 parallel lines approximately 1/32" apart (can be spread slightly).
# 11-2M Dual Line
Medium round dual-line tip. Burns 2 parallel lines approximately 1/32" apart (can be spread slightly).
# 11-2S Dual Line
Burns 2 fine, parallel lines approximately 1/32" apart. Speeds up fine detailing of hair and feathers. Unique to Razertip.
# 11-8 Multi-Line
Burns 8 fine, parallel lines approximately 1/32" apart. Speeds up fine detailing of hair, feathers, grass, etc.. HD cord recommended.
# 12L Large Curved Spear
Curved spear allows you to reach into areas otherwise unreachable. The point overhangs the pen barrel, allowing the hot point to contact the surface even in very tight areas.
# 12S Small Curved Spear
Very small curved spear allows you to reach into areas otherwise unreachable. The point overhangs the pen barrel, allowing the point to contact the surface even in tight areas.
#12XS Extra Small Curved Spear
This extremely small curved spear will let you burn in tiny confined areas. Less than 1/32" wide at the blade! Unique to Razertip. Lower heat recommended.
Ceramic Abrasive SticksSolid 2" x 3/32” diameter ceramic abrasive sticks will fit directly into your rotary tool. Ceramic sticks will outlast conventional stones by many times. Because they are uniform in diameter, they are absolutely vibration-free and they cut cleaner and smoother than any other texturing tool. Available in 8 grits from #120 to #1200.
Cut your sanding time in half or less! These sanders use cloth-backed sand-paper and give a super smooth finish. Intended for finish sanding.
Carving Supplies CatalogueDownload our lastest Carving Supplies Catalogue.
