Welcome To Razertip The best pyrography woodburning tools!

Razaire Mini - X60

Keep your pyrography workspace fresh and clear of smoke with the Razaire™ MINI Smoke Extractor. With multi-stage carbon filtration and a versatile design the Razaire™ MINI works in most settings and with any project. The soft Hood Grip allows the Razaire™ MINI to be used on top of your project to ensure maximum smoke capture and filtration. With its quiet operation the Razaire™ MINI will peacefully help you on your creative journey.

Razaire Mini - X60 smoke extractor
  • Multi-Stage Carbon Filtration
  • 2-Speed Operation
  • Replaceable Filters
  • Filter stages can be added with the Expansion Kit
  • Can be used vertically or horizontally
  • Mount to a compatible support for more flexibility
  • Clear Hood can be removed for versatility
  • Removable soft rubber Hood Grip
  • Warranty: 3 Years
  • Size: 5" x 5" x 6" (13 cm x 13 cm x 15 cm)
  • Weight: 15.2 oz / 430 g
Razaire Mini - X60 Hood
Razaire Mini - X60 Filters

Replaceable Filters

Razaire Mini - X60 Prefilter
Razaire Mini - X60 Primary Filter

The unit can still be used as a fan to draw air away from your burning surface even if the filters are removed or no longer effective.

For the most effective smoke reduction replace filters regularly. Recommended replacement interval for the Prefilter (Replacement # XF105) is approximately every 25 hours of burning if you burn hot and generate lots of smoke, and approximately every 50 hours if you burn more moderately.

The Primary Filter (Replacement # XF102) should be replaced every other time you replace the Prefilter. This works out to roughly 50-100 hours between Primary Filter changes. This is a basic guideline only. You may find that you want (or need) to replace filters more frequently or less frequently, depending on how effective you feel the filter is at removing smoke while you are burning.

Expansion Kit

Razaire Mini - X60 Primary Filter Expansion Kit

You can increase the filtering efficiency of the Razaire™ MINI by adding one or more Primary Filter Expansion Kits (# XF200). Each kit includes an Expansion Frame and a new Primary Filter. No tools required. To install simply remove the Top Cap from the unit and snap in the Expansion Frame. The extra filter can be set directly on top of the existing filter (be sure to remove the protective paper tabs from the new filter first). Snap the Top Cap back in place.

You can add as many extra Primary Filter stages as you want, however air flow through the unit will be reduced slightly with each additional filter stage you add.

Note: You cannot add extra Pre-filters to the Razaire™ MINI.